BMW · CarPlay interface
BMW CarPlay and Android Auto for CCC, CIC, NBT and NBT EVO
Whether Apple CarPlay or Android Auto is possible in your BMW depends on the iDrive system in the car. On one system we unlock it by coding, on another we fit an interface module so CarPlay and Android Auto run on the original screen with the existing controls.
We do not use a separate dongle that overwrites the original picture.
Seven Tuning works in Rotterdam and Waddinxveen: the workshop is in Waddinxveen and serves Rotterdam and the surrounding area. Remote coding works anywhere in the Netherlands and abroad, when the job allows it.
Configure my carBook an appointmentWhatsApp
CCC (older E-series with navigation)
For CCC we fit an interface module made for this system. Condition: AUX must be active. Cars with M-ASK or a radio only first need a navigation screen.
- 1 Series E8x, 3 Series E9x, 5 Series E6x, X5 and X6 E7x
CIC (E-series and early F-series)
For CIC an interface module is the route as well; there is a separate module per system.
- E8x, E9x, E6x, E7x, X1 E84, Z4 E89
- 1 to 4 Series F20, F22, F30 and F32 with CIC
NBT and NBT EVO ID4
On NBT and on NBT EVO with software ID4, CarPlay and Android Auto work through an interface module on the original screen.
NBT EVO ID5 / ID6 (usually built from mid-2016)
Here Apple CarPlay is unlocked without extra hardware. CarPlay can then use the full wide screen instead of part of it. First we check which iDrive system and software version the car has.
- 1 to 4 Series F20, F22, F30, F32 and the M models F8x
- 5 Series F10, 6 Series F1x, X3 and X4 F25, X5 and X6 F15, X1 F48, X2 F39, 2 Series Active/Gran Tourer F45
- G-series with NBT EVO, such as 5 Series G30, 6 Series GT G32, 7 Series G11 and X3 G01
iDrive 7 (G-series from 2019)
On many cars from 2019 CarPlay is already on as standard; where it is not, we unlock it. Android Auto is only possible from iDrive 7 (MGU). On iDrive 8 and 8.5 we check the options at diagnosis.
MINI F-series
On the MINI F54, F55, F56, F57 and F60 the same routes apply: unlock where the system allows it, otherwise an interface module.
BMW coding and hidden features
Frequently asked questions
Which system does my BMW have?
We read it out at the diagnosis. You can also send a photo of the screen and your plate number via WhatsApp beforehand; we then tell you which route fits.
Do the original controls still work?
Yes. With coding you simply use the iDrive controller, the screen and voice. An interface module works on the original screen with the existing controls.
Can it be done remotely?
Unlocking on NBT EVO and iDrive 7 is coding; it can be done remotely when the job allows it. An interface module is fitted in the workshop in Waddinxveen.
More about our services
Seven Tuning · Rotterdam & WaddinxveenPrivacyTermsAccessibility